Epilog FiberMark 30W / Powder-coated metal

Powder-coated metal on Epilog FiberMark 30W

manufacturer mark
Test on scrap first. Settings are starting points from the linked source.
Machine
Epilog FiberMark 30W
Laser type
fiber
Wattage
30W
Material
Powder-coated metal
Operation
mark
Power
100%
Speed
40-50% (Epilog speed scale)
Passes
2-3
Frequency / pulse
100% (Epilog frequency scale)
Line interval / DPI
600 DPI
Notes
Epilog FiberMark suggested settings (Etching/marking); focus +.05 to +.07 in. Epilog speed and frequency are % scales (speed is non-linear). Two to three passes suggested: ablate coating, then polish base metal.
Source: Epilog Laser
Summarized from the linked source. Always test on scrap before production runs.