Epilog FiberMark 20W / Stainless steel – polishing (white)

Stainless steel – polishing (white) on Epilog FiberMark 20W

manufacturer mark
Test on scrap first. Settings are starting points from the linked source.
Machine
Epilog FiberMark 20W
Laser type
fiber
Wattage
20W
Material
Stainless steel – polishing (white)
Operation
mark
Power
35-40%
Speed
50-60% (Epilog speed scale)
Passes
1
Frequency / pulse
50-60% (Epilog frequency scale)
Line interval / DPI
600 DPI
Notes
Epilog FiberMark suggested settings (Polishing); focus 0. Epilog speed and frequency are % scales (speed is non-linear). Clean with alcohol first; tune power in small steps.
Source: Epilog Laser
Summarized from the linked source. Always test on scrap before production runs.