Epilog FiberMark 30W / Stainless steel – annealing

Stainless steel – annealing on Epilog FiberMark 30W

manufacturer mark
Test on scrap first. Settings are starting points from the linked source.
Machine
Epilog FiberMark 30W
Laser type
fiber
Wattage
30W
Material
Stainless steel – annealing
Operation
mark
Power
100%
Speed
7-12% (Epilog speed scale)
Passes
1
Frequency / pulse
1% (Epilog frequency scale)
Line interval / DPI
600 DPI
Notes
Epilog FiberMark suggested settings (Annealing); focus +.08 to +.110 in. Epilog speed and frequency are % scales (speed is non-linear). Annealing needs the beam well out of focus (or -.060 to -.090 in).
Source: Epilog Laser
Summarized from the linked source. Always test on scrap before production runs.