Fiber laser (Laser Everything, EzCad) / Magpul PMAG (polymer magazine) – tan mark

Magpul PMAG (polymer magazine) – tan mark on Fiber laser (Laser Everything, EzCad)

youtube mark
Test on scrap first. Settings are starting points from the linked source.
Machine
Fiber laser (Laser Everything, EzCad)
Laser type
fiber
Material
Magpul PMAG (polymer magazine) – tan mark
Operation
mark
Power
20%
Speed
7500 mm/s
Passes
2
Frequency / pulse
50 kHz
Line interval / DPI
0.05 mm
Notes
Laser Everything "PMAG tan" preset. Crosshatch with snake pattern at 45° and -45° (both enabled) in EzCad. Wattage not stated (author says any standard fiber laser works; shop lists 30/50W JPT and 60W M7 MOPA). Spoken in video (Whisper transcript). Ventilate.
Source: Laser Everything
Summarized from the linked source. Always test on scrap before production runs.