xTool D1 Pro / Birch plywood

Birch plywood (3mm) on xTool D1 Pro

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool D1 Pro
Laser type
diode
Wattage
10W
Material
Birch plywood
Thickness
3mm
Operation
engrave
Power
80%
Speed
100 mm/s
Passes
1
Notes
Manufacturer table via CutChart (D1 Pro 10W). Manufacturer fill/raster setting. Test on scrap; air assist/focus often not specified.
Source: Manufacturer via CutChart · 2026-10-02
Summarized from the linked source. Always test on scrap before production runs.