xTool F1 Ultra / 3D-print filament (PLA/PETG/ABS/ASA)

3D-print filament (PLA/PETG/ABS/ASA) on xTool F1 Ultra

youtube mark
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1 Ultra
Laser type
fiber
Wattage
20W
Material
3D-print filament (PLA/PETG/ABS/ASA)
Operation
mark
Power
30%
Speed
1500 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
300 lines/cm
Notes
Robert Cowan's generic starter test for any new filament on the 20W F1 Ultra fiber (crosshatch, 1 pass); lower power/faster with repeat passes avoids melting. Says carbon-fiber, glass-fiber and TPU filaments don't mark well; color/pigment matters more than type. Spoken in video (Whisper transcript). Test on scrap; ventilate.
Source: Robert Cowan DIY
Summarized from the linked source. Always test on scrap before production runs.