xTool F1 / PLA (black)

PLA (black) on xTool F1

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1
Laser type
IR fiber
Wattage
2W
Material
PLA (black)
Operation
engrave
Power
50%
Speed
200 mm/s
Passes
1
Notes
Batch Studio troubleshooting test: alternate confirmed stable setting for F1 IR on black PLA (equivalent to 100% at 1000 mm/s). Narrow raster areas can overburn; add side bars to equalize raster width. Test on scrap; ventilate.
Source: Batch Studio
Summarized from the linked source. Always test on scrap before production runs.