ComMarker Omni 1 UV / Leather badge

Leather badge on ComMarker Omni 1 UV

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1 UV
Laser type
UV
Wattage
5W
Material
Leather badge
Operation
engrave
Speed
1000 mm/s
Passes
1
Frequency / pulse
30 kHz
Notes
ComMarker Omni 1 UV 5W material guide (LightBurn; power is greyed out on this source): Q-pulse 20. Engrave pass; engrave first, then cut. Vegetable-tanned leather gives best contrast.
Source: ComMarker · 2025-04-14
Summarized from the linked source. Always test on scrap before production runs.