ComMarker Omni 1 UV / Bambu filaments (PLA Matte, PETG, ABS, 3D-printed)

Bambu filaments (PLA Matte, PETG, ABS, 3D-printed) on ComMarker Omni 1 UV

forum engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1 UV
Laser type
UV
Wattage
5W
Material
Bambu filaments (PLA Matte, PETG, ABS, 3D-printed)
Operation
engrave
Speed
6000 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
0.03 mm
Notes
Same cooltoff starting point (Q-pulse 1 ns, 40 kHz, 0.03 mm, 6000 mm/s) used across Bambu PLA Matte rainbow, PETG and ABS swatches; TPU swatch needed different settings. Per-color tweaks mostly via speed.
Source: cooltoff (Bambu Lab forum) · 2025-01-10
Summarized from the linked source. Always test on scrap before production runs.