ComMarker Omni 1 UV / PLA-CF (Bambu Lab, 3D-printed)

PLA-CF (Bambu Lab, 3D-printed) on ComMarker Omni 1 UV

forum engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker Omni 1 UV
Laser type
UV
Wattage
5W
Material
PLA-CF (Bambu Lab, 3D-printed)
Operation
engrave
Speed
6000 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
0.03 mm
Notes
Bambu Lab forum user cooltoff (ComMarker Omni 1 5W UV, LightBurn): logo settings found after PLA-CF tests: speed 6000, interval 0.03, Q-pulse 1 ns, 40 kHz, Jarvis for the image part. Q-pulse 25 ns gave very similar results.
Source: cooltoff (Bambu Lab forum) · 2025-01-10
Summarized from the linked source. Always test on scrap before production runs.