OMTech 60W CO2 / PETG (black, 3D-printed)

PETG (black, 3D-printed) on OMTech 60W CO2

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
OMTech 60W CO2
Laser type
CO2
Wattage
60W
Material
PETG (black, 3D-printed)
Operation
engrave
Power
10–20%
Speed
500 mm/s
Passes
1
Notes
Ed Nisley: black PETG print at 500 mm/s with 10% and 20% power; glossy bottom (bed-side) surface marked, rougher top surface needed more power. Results less attractive than PETG-CF. Ventilate.
Source: Ed Nisley (softsolder.com) · 2025-01-07
Summarized from the linked source. Always test on scrap before production runs.