Thunder Laser USA 80W MOPA / ABS (black mark)

ABS (black mark) on Thunder Laser USA 80W MOPA

forum engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Thunder Laser USA 80W MOPA
Laser type
MOPA fiber
Wattage
80W
Material
ABS (black mark)
Operation
engrave
Power
15% (min 5%)
Speed
3800 mm/s
Passes
1
Frequency / pulse
200 kHz
Line interval / DPI
0.025 mm
Notes
Thunder Laser USA tech (ArmandoThunderLaserUSA) shared the LightBurn library (MarkParam.clb) given to buyers of their fiber machines, 80W with 110x110 mm field; entry "Experimental / Black ABS"; pulse width not set. Starting point; test on scrap; ventilate (plastic).
Source: ArmandoThunderLaserUSA (LightBurn forum) · 2024-12-23
Summarized from the linked source. Always test on scrap before production runs.