Full Spectrum Laser galvo fiber 50W / Matte coating (removal)

Matte coating (removal) on Full Spectrum Laser galvo fiber 50W

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Full Spectrum Laser galvo fiber 50W
Laser type
fiber
Wattage
50W
Material
Matte coating (removal)
Operation
engrave
Power
25%
Speed
1000 mm/s
Passes
2
Frequency / pulse
20 kHz
Line interval / DPI
0.02 mm
Notes
Full Spectrum Laser "Galvo Laser Settings – Fiber Setting" chart; approximate, varies with installed lens and laser source. 2nd pass is a clean-up at 15-20% power.
Source: Full Spectrum Laser
Summarized from the linked source. Always test on scrap before production runs.