JPT fiber 60W / AirPods Pro case (white plastic, tan mark)

AirPods Pro case (white plastic, tan mark) on JPT fiber 60W

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT fiber 60W
Laser type
fiber
Wattage
60W
Material
AirPods Pro case (white plastic, tan mark)
Operation
engrave
Power
45%
Speed
2000 mm/s
Passes
1
Frequency / pulse
200 kHz
Line interval / DPI
0.04 mm
Notes
BWM Laser settings table entry "Sandstone Tan on Apple Airpods Pro"; 150 mm lens; Ezcad; pulse ns 200; hatch type Unidirectional Hatch; angle 0; crosshatch On; angle increment 0; Plastic: ventilate; test on scrap.
Source: BWM Laser
Summarized from the linked source. Always test on scrap before production runs.