JPT fiber 50W / Ceramic tile with TiO2 (dark gray mark)

Ceramic tile with TiO2 (dark gray mark) on JPT fiber 50W

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT fiber 50W
Laser type
fiber
Wattage
50W
Material
Ceramic tile with TiO2 (dark gray mark)
Operation
engrave
Power
36%
Speed
150 mm/s
Passes
1
Frequency / pulse
100 kHz
Line interval / DPI
0.025 mm
Notes
BWM Laser settings table entry "Ceramic Tile – TiO2 – Dark Gray"; 150 mm lens; LightBurn; hatch type Bidirectional Hatch; angle 45; crosshatch Off; angle increment 0; Test on scrap.
Source: BWM Laser
Summarized from the linked source. Always test on scrap before production runs.