fiber 30W / Polymer pistol frame (SIG stippling)

Polymer pistol frame (SIG stippling) on fiber 30W

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
fiber 30W
Laser type
fiber
Wattage
30W
Material
Polymer pistol frame (SIG stippling)
Operation
engrave
Power
65%
Speed
700 mm/s
Frequency / pulse
40 kHz
Line interval / DPI
0.088 mm
Notes
BWM Laser settings table entry "SIG Settings – 30W"; 200 mm lens; Flood fill off. 3 passes rotating 90° then let cool. Repeat until 12 passes. Hit it with a brass wire brush when you’re done; Plastic: ventilate; test on scrap.
Source: BWM Laser
Summarized from the linked source. Always test on scrap before production runs.