AtomStack A40 Pro V2 / Wrench (chrome-vanadium alloy)

Wrench (chrome-vanadium alloy) on AtomStack A40 Pro V2

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
AtomStack A40 Pro V2
Laser type
diode
Wattage
40W
Material
Wrench (chrome-vanadium alloy)
Operation
engrave
Power
90%
Speed
1000 mm/min
Passes
1
Line interval / DPI
0.08
Notes
Official AtomStack wiki material parameters (snapshot 2026-08-27). Software: LightBurn. Image mode: Threshold. Test on scrap; results vary by batch, focus, and air assist.
Source: AtomStack Wiki · 2026-08-27
Summarized from the linked source. Always test on scrap before production runs.