Monport 40W CO2 / Rubber stamp material

Rubber stamp material on Monport 40W CO2

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Monport 40W CO2
Laser type
CO2
Wattage
40W
Material
Rubber stamp material
Operation
engrave
Power
50%
Speed
150 mm/s
Passes
1
Line interval / DPI
0.051 mm
Notes
Good stamp relief. Invert design. 500 DPI for fine text. Community-reported via Bonny Creations. Test on scrap; results vary by tube and focus.
Source: Bonny Creations community · 2026-10
Summarized from the linked source. Always test on scrap before production runs.