Polyester (thin sheet) on ComMarker B4 MOPA
blog cutTest on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Polyester (thin sheet)
Operation
cut
Power
40% (min 7%)
Speed
1000 mm/s
Passes
1
Frequency / pulse
25 kHz
Line interval / DPI
0.08 mm
Notes
Line (cut) mode. Starting preset from this machine's LightBurn library (MarkParam.clb), marked "not yet verified" by the source; pulse width shows LightBurn default 200 ns; 126x126 mm field, 45° cross-hatch. Test on scrap.
Source: Henry Elsner (Hank) III