ComMarker B4 MOPA / Glock polymer

Glock polymer on ComMarker B4 MOPA

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Glock polymer
Operation
engrave
Power
15% (min 6%)
Speed
2000 mm/s
Passes
1
Frequency / pulse
190 kHz
Line interval / DPI
0.025 mm
Notes
Starting preset from this machine's LightBurn library (MarkParam.clb), marked "not yet verified" by the source; pulse width shows LightBurn default 200 ns; 126x126 mm field, 45° cross-hatch. Test on scrap.
Source: Henry Elsner (Hank) III
Summarized from the linked source. Always test on scrap before production runs.