ComMarker B4 MOPA / Delrin (black, tan mark)

Delrin (black, tan mark) on ComMarker B4 MOPA

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B4 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
Delrin (black, tan mark)
Operation
engrave
Power
6%
Speed
1500 mm/s
Passes
1
Line interval / DPI
0.025 mm
Notes
Frequency not set in entry (LightBurn default). Starting preset from this machine's LightBurn library (MarkParam.clb), marked "not yet verified" by the source; pulse width shows LightBurn default 200 ns; 126x126 mm field, 45° cross-hatch. Test on scrap.
Source: Henry Elsner (Hank) III
Summarized from the linked source. Always test on scrap before production runs.