xTool F2 Ultra UV / PLA (orange, Bambu Lab Basic)

PLA (orange, Bambu Lab Basic) (2mm) on xTool F2 Ultra UV

blog engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F2 Ultra UV
Laser type
UV
Wattage
5W
Material
PLA (orange, Bambu Lab Basic)
Thickness
2mm
Operation
engrave
Power
50%
Speed
200 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
240 lines/cm
Notes
Embrace Making 3D-printed PLA test card (printed on Bambu Lab H2S), recommended for medium text/graphics; same values top and bottom layer. Large solid fills or very thin lines may need 10-20% more power or slower speed. Ventilate and filter fumes.
Source: Embrace Making · 2025-12-05
Summarized from the linked source. Always test on scrap before production runs.