PLA (dark / black or gray) on xTool F1 Ultra
youtube engraveTest on scrap first. Settings are starting points from the linked source.
Machine
xTool F1 Ultra
Laser type
fiber
Wattage
20W
Material
PLA (dark / black or gray)
Operation
engrave
Power
50%
Speed
1000 mm/s
Passes
1
Notes
Inventors Assemble F1 Ultra fiber tests on 3D-printed PLA: after trying many combinations, they said you need at least 50% power and 1000 mm/s. Stick to dark colors (black/gray); light colors give poor contrast. They advised against TPU. Ventilate.
Source: Inventors Assemble