LaserPecker LP4 / ABS

ABS on LaserPecker LP4

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
LaserPecker LP4
Laser type
fiber
Wattage
2W
Material
ABS
Operation
engrave
Power
60%
Speed
res 1k
Passes
1
Notes
Official LP4 V655 2W 1064 nm material table: Fill at 1k resolution, Depth 86%. LaserPecker uses Power%/Depth% (not mm/s). Firmware may shift results; test on scrap and vent ABS fumes.
Source: LaserPecker · 2025-12-24
Summarized from the linked source. Always test on scrap before production runs.