fiber MOPA 200W / PETG (3D-printed scrap)

PETG (3D-printed scrap) on fiber MOPA 200W

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
fiber MOPA 200W
Laser type
MOPA fiber
Wattage
200W
Material
PETG (3D-printed scrap)
Operation
engrave
Power
8%
Speed
750 mm/s
Passes
1
Frequency / pulse
30 kHz
Line interval / DPI
0.01 mm
Notes
LA Hobby Guy user thinwoodsman on 3D-printed PETG scrap: 750 mm/s, 8% power, 30 kHz, 500 ns Q-pulse, 0.01 mm line interval—light/bleached visible mark. A hotter 1000 mm/s / 10% / 35 kHz / 400 ns combo was too much heat on their 200W machine (raised, fuzzy mark). Ventilate.
Source: thinwoodsman · 2024-04-20
Summarized from the linked source. Always test on scrap before production runs.