Cloudray QS50 / PETG (dark)

PETG (dark) on Cloudray QS50

youtube engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Cloudray QS50
Laser type
fiber
Wattage
50W
Material
PETG (dark)
Operation
engrave
Power
<15% (lower than PLA baseline)
Speed
>3250 mm/s (faster than PLA baseline)
Passes
1
Frequency / pulse
200 kHz (or machine max)
Notes
Cowan fiber 3D-print tests: PETG marked well but more heat-sensitive than PLA—needed lower power and faster speed than the 3250 mm/s / 15% PLA baseline. Hatch fill; calibrate galvo on/off offsets for crisp edges.
Source: Robert Cowan
Summarized from the linked source. Always test on scrap before production runs.