Cloudray QS50 / PLA (dark colors / blacks / bold colors)

PLA (dark colors / blacks / bold colors) on Cloudray QS50

youtube engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Cloudray QS50
Laser type
fiber
Wattage
50W
Material
PLA (dark colors / blacks / bold colors)
Operation
engrave
Power
15%
Speed
3250 mm/s
Passes
1
Frequency / pulse
200 kHz (or machine max)
Notes
Robert Cowan EZCad hatch-fill mark on 3D-printed PLA: 3250 mm/s, 15% on 50W fiber, freq ~200 (or highest available). Dark/matte PLA marks best; bright yellow/white/light gray barely mark. Too-dark = too much energy—lower power or raise speed. Ventilate.
Source: Robert Cowan
Summarized from the linked source. Always test on scrap before production runs.