OMTech 40W CO2 / Acrylic (black, 3mm cast)

Acrylic (black, 3mm cast) (3 mm) on OMTech 40W CO2

community engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
OMTech 40W CO2
Laser type
CO2
Wattage
40W
Material
Acrylic (black, 3mm cast)
Thickness
3 mm
Operation
engrave
Power
20%
Speed
300 mm/s
Passes
1
Air assist
no
Notes
Bonny Creations OMTech 40W community-verified: frosted engrave on 3mm cast black acrylic at 300 mm/s / 20% / 1 pass (~254 DPI). No air assist for engrave (micro-crack risk).
Source: Bonny Creations · 2026
Summarized from the linked source. Always test on scrap before production runs.