JPT fiber 60W / POM / Delrin (black; white mark)

POM / Delrin (black; white mark) on JPT fiber 60W

official engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
JPT fiber 60W
Laser type
fiber
Wattage
60W
Material
POM / Delrin (black; white mark)
Operation
engrave
Power
9%
Speed
1500 mm/s
Passes
1
Frequency / pulse
40 kHz
Line interval / DPI
0.025 mm
Notes
BWMLASER materials settings: White marking on POM C — 60W JPT 175mm LightBurn; 1500 mm/s, 9% power, 40 kHz, pulse 200 ns, angle 45, crosshatch+flood fill on, unidirectional hatch. Formaldehyde risk—ventilate.
Source: BWMLASER
Summarized from the linked source. Always test on scrap before production runs.