Gweike G2 Pro / PLA (dark)

PLA (dark) on Gweike G2 Pro

youtube engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
Gweike G2 Pro
Laser type
fiber
Wattage
30W
Material
PLA (dark)
Operation
engrave
Power
15%
Speed
7000 mm/s
Passes
1–2
Frequency / pulse
150 kHz
Notes
The DIY Life: starting point for most dark PLA on G2 Pro fiber—fast speed, low power, high frequency. Second pass cleans dark spots / sharpens text. Pigment/color varies; will not mark white or very light colors. Ventilate; test on scrap.
Source: The DIY Life
Summarized from the linked source. Always test on scrap before production runs.