Clear acrylic (3mm) on Monport 40W CO2

community cut

Test on scrap first. Settings are starting points from the linked source.

Machine

Monport 40W CO2

Laser type

CO2

Wattage

40W

Material

Clear acrylic

Thickness

3mm

Operation

cut

Power

55%

Speed

12 mm/s

Passes

Air assist

yes

Notes

Clean cut. Remove film. Vent well. Community-reported via Bonny Creations. Test on scrap; results vary by tube and focus.

Source: Bonny Creations community · 2026-10

Summarized from the linked source. Always test on scrap before production runs.