ComMarker B6 MOPA / ABS / PETG (ID card)

ABS / PETG (ID card) on ComMarker B6 MOPA

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
ComMarker B6 MOPA
Laser type
MOPA fiber
Wattage
60W
Material
ABS / PETG (ID card)
Operation
engrave
Power
40%
Speed
2000 mm/s
Passes
1
Line interval / DPI
0.03 mm
Notes
ComMarker B6 60W MOPA plastic ID-card recipe (EZCAD2). Source says use ABS or PETG cards—avoid PVC. High speed limits warping; mask with low-tack tape; test on scrap.
Source: ComMarker · 2025-04-15
Summarized from the linked source. Always test on scrap before production runs.