OMTech MOPA 20W / PLA (dark)

PLA (dark) on OMTech MOPA 20W

youtube engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
OMTech MOPA 20W
Laser type
MOPA fiber
Wattage
20W
Material
PLA (dark)
Operation
engrave
Power
100%
Speed
1000 mm/s
Passes
1
Notes
The 3D Printing Zone: after grid tests (speed 10–1000, power 10–100), best PLA mark was 100% @ 1000 mm/s. Slow+high power melted PLA; dark PLA preferred over light gold/gray. Focus critical; ventilate; test on scrap.
Source: The 3D Printing Zone · 2025-05-02
Summarized from the linked source. Always test on scrap before production runs.