xTool F1 / PETG (blue)

PETG (blue) on xTool F1

guide engrave
Test on scrap first. Settings are starting points from the linked source.
Machine
xTool F1
Laser type
IR fiber
Wattage
2W
Material
PETG (blue)
Operation
engrave
Power
100%
Speed
300 mm/s
Passes
1
Line interval / DPI
240 lpcm
Notes
Batch Studio blue PETG IR sweet-spot for even off-white mark (also cited 180 mm/s @ 180 lpcm 100%, or 200 mm/s @ 240 lpcm 70%). Beyond this, melts; test on scrap.
Source: Batch Studio
Summarized from the linked source. Always test on scrap before production runs.